edms?5?? idss?5?? www.samtec.com samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. f-203 supplement idm edm ids = standard tail male plug = long tail male plug = socket specifications: idss, idsd insulator material: black glass filled polyester temperature range: -65 c to +80 c withstanding voltage: 1000 vrms @ 60 hz contact: becu plating: au over 50 " (1,27 m) ni or sn over 100 " (2,54 m) cu or 50 " (1,27 m) ni current rating: 1a contact resistance: 10 m ? max socket retention in body: 5lb (22,25n) against barb lead size range: .022" (0,56mm) sq to .028" (0,71mm) sq lead insertion depth: .185" (4,70mm) to .250" (6,35mm) insertion force: 4 oz avg (.025" (0,63mm) sq probe) withdrawal force: 3 oz avg (.025" (0,63mm) sq probe) wire: 28 awg 7/36 stranded tinned copper specifications: idms, idmd edms, edmd insulator material: black glass filled polyester temperature range: -65 c to +80 c withstanding voltage: 1000 vrms @ 60 hz contact: becu plating: au over 50 " (1,27 m) ni or sn over 100 " (2,54 m) cu or 50 " (1,27 m) ni current rating: 1a terminal retention in body: 5lb (22,25n) against barb wire: 28 awg 7/36 stranded tinned copper end assembly row option no. pins per row type strip 02 thru 32 02 thru 36 mates with: tsw, mtsw, bst, lcw idc cable strips idms, idmd, idss, idsd edms & edmd series s d = double (color coded cable n/a for 31 thru 36 pins/row. see ? option.) s d = single idsd (double) idss (single) socket or male plug on each end socket or male plug on one end ? = single end ? = double end male plug on one end with socket on other. begin part number with idm or edm. ? = transfer end note: this series is non-standard, non-returnable. double full size (72 positions): (91,71) 3.650 less than 72 positions: no. positions/row x (2,54) .100 + (1,50) .059 single full size (32 positions): (91,69) 3.610 less than 36 positions: no. positions/row x (2,54) .100 + (0,48) .019 (2,54) .100 (0,76) .030 sq (9,27) .365 ref (5,08) .200 (2,54) .100 type strip idm edm a (3,18) .125 (5,08) .200 edmd idmd (double) edms idms (single) (0,48) .019 double full size (64 positions): (82,55) 3.250 less than 64 positions: no. positions/row x (2,54) .100 + (1,68) .066 single full size (32 positions): (81,53) 3.210 less than 32 positions: no. positions/row x (2,54) .100 + (0,71) .028 (0,46) .018 x (0,48) .019 (2,54) .100 (2,54) .100 (2,54) .100 (5,08) .200 (6,10) .240 max a
edms 05 s 4 idss 05 s 4 www.samtec.com samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec asia pacific tel: 65 6745-5955 fax: 65 6841-1502 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec taiwan tel: 886-02-2364-6077 fax: 886-02-2367-9531 samtec hong kong tel: 852-26904858 fax: 852-26904842 samtec anz tel: 613 9512 7747 fax: 613 9512 7745 due to technical progress, all designs, specifications and components are subject to change without notice. f-203 supplement when mating double row connector with two single row connectors, the outer most single will be connected to conductor #1 and the inside single to conductor #2. 1/8" (3,18) 1/4" (6,35) 1/2" (12,70) 3/8" (9,53) ?t8 ?t4 ?t2 ?t3 xx 5"max. 2"min. o = outside reversed option assembled length t c a p xx =polarized r = reversed d xx = daisy chain, double w xx = wiring reversed daisy chain, single st x = stripped & tinned s xx = daisy chain single g = gray cable 1 2 3 specify g for gray cable. gray cable has one red edge. idss uses .100" centerline cable. idsd and idmd uses .050" centerline cable. cable is 28 awg 7/36 copper wire. standard cable is same as above except color coded. specify xx as position. for double the same position will be polarized on both ends. (not available on idm or edm, unless transfer, then only the socket is polarized) standard plating is selective gold over becu contact for ids; selective gold over phosphor bronze for idm & edm. same as s xx except outer strip connected to conductor #2 and inside strip connected to conductor #1. 7 7 7 02 04 01 03 72 71 assembled length in inches ( 1/8 " ) (2 inches minimum) 16 1 / specify suffix from table. all dimensions are ". not available in 28 positions and higher. 4 b xx = breakout specify xx as number of conducts to be broken out. breakout starts with number 1 lead indicated by brown wire or red stripe. shown on top side. 5 rw = reversed wiring #1 wire opposite position #1. 8 m = middle reversed 8 requires sxx, wxx or dxx requires sxx, wxx or dxx 8 6 2 " min. 4 " minimum xx 1 8 " single row connectors (idss) outer most 2 " min. 4 " minimum xx 1 8 " double row connectors (idsd or idmd) outer most polarizing key optional polarizing key for use with idss & idsd series. also polarizes ssw, ssq, esw & esq series. black high temperature thermoplastic order: part number pk-01 r = reversed (5,84) .230 (0,64) .025 sq = tin plating (both ends) = tin idm/ 10 " (0,25 m) gold ids = 10 " (0,25 m) gold idm/ tin ids idc cable strips idms, idmd, idss, idsd edms & edmd series
|